Emergency?
Call Perth Locksmith - Ultimate Lock & Security

Fast & Cost Effective

BNI Membership Logo
WA Owned Business Logo

CALL NOW 24/7 FOR HELP

Emergency?
Perth Locksmith 24/7

CALL NOW 24/7 FOR HELP

Emergency?
Call Perth Locksmith 24/7 - Ultimate Lock & Security

Fast & Cost Effective

Fail-Safe vs Fail-Secure Locks for Perth Businesses

Fire Safety and Fail-Safe vs Fail-Secure: What Perth Businesses Need to Know About Access Control Locks

Key Takeaways

  • •Fail-safe locks release when power is cut; fail-secure locks stay locked.
  • •Fail-safe suits general exit paths where free egress is required.
  • •Fail-secure suits fire-rated doors, server rooms and secure storage.
  • •Most buildings need a mix, set door by door after a site assessment.
  • •Getting the setting wrong has serious safety and compliance implications.

You’ve chosen an electronic lock for your door, but nobody has told you what it does when the power goes out. In a fire or a blackout, that single setting decides whether people can leave and whether your premises stay secured.

What Do Fail-Safe and Fail-Secure Actually Mean?

Two opposite responses to the same event: losing power.

Electronic locks such as electric strikes and magnetic locks depend on power. Fail-safe and fail-secure describe what the lock does when that power is cut. They are often confused with one another, and with the reader or keypad, which controls who gets in rather than how the lock behaves.

A fail-safe lock releases when power is cut. A fail-secure lock remains locked without power. Neither is better overall. Each is correct for different doors, and the choice belongs in the specification stage, before any hardware is ordered.

Fire-rated doors must positively latch under AS1905.1/BCA, so they call for fail-secure hardware. Getting this wrong has serious safety and compliance implications.

Commercial smart door Lock installation

Which Configuration Should You Choose? A Ranked Shortlist

Ranked by how many compliance and security risks each setup closes off.

1. Fail-secure configuration, best for fire-rated doors and secure rooms

A fail-secure lock stays locked when power is lost. That matters on fire-rated doors, which must positively latch under AS1905.1/BCA. It also matters on server rooms and secure storage, where a power cut shouldn’t leave the door open.

The trade-off is egress. Because the lock holds in a blackout, anyone inside must still be able to leave by another means, so the door’s exit arrangements need to be planned alongside the lock. This is the first thing to raise with your locksmith.

Best suited for: Businesses protecting fire-rated doors, server rooms or secure storage. Its drawback is that it relies on a separate, compliant exit method when the power is out.

2. Fail-safe configuration, best for general exit paths

A fail-safe lock releases when power is cut, so people can always walk out. That makes it appropriate for general exit paths where free egress is required, such as a corridor or a staff exit.

The drawback is that the door is no longer secured during an outage. It is the wrong choice for anything that must hold or latch, and it is not suited to fire-rated doors.

Best suited for: Offices and warehouses with doors that people must always be able to leave freely. It is not suited to areas that must stay locked during a power failure.

3. Mixed configuration, best for whole-building planning

Most premises have both kinds of door. The practical answer is to set each door on its own merits: fail-secure where the door must hold or latch, fail-safe where free exit comes first. A door-by-door assessment is the only reliable way to get this right.

Ultimate Lock supplies and installs electric strikes, magnetic locks, digital locks and keypads through its commercial locksmith services across Perth. For help choosing the lock type itself, see our hub article, Electric Strikes vs Maglocks: Which Is Right for Your Perth Warehouse or Office Door?

Best suited for: Businesses with several door types, such as a front entry, a server room and a back exit. It needs more upfront planning than a single blanket setting.

Ask your locksmith about fail-safe vs fail-secure before installation is complete, not at handover. Changing the approach after the wiring is done costs time.

Where Do You Go From Here?

Related guides in this cluster cover the hardware itself.

To see how each lock works, read How Electric Strikes Work: A Practical Guide for Perth Business Owners and How Maglocks Work: Pros, Cons and Best Uses for Commercial Doors. For running costs, see Installation Costs, Power Needs and Maintenance: Electric Strikes vs Maglocks Compared.

For specific door types, Choosing the Right Access Control Lock for Different Doors: Warehouse Roller Doors, Glass Office Entrances and Back Exits goes further. For larger sites, commercial access control systems can be managed from a single interface.

How We Ranked These Configurations

Rankings are earned, not assigned. Each configuration was judged against the same criteria, and where a rival wins a criterion, the table shows it.

1

Behaviour when power is cut

Whether the door releases or stays locked. This decides both security and exit during an outage.

2

Fit for fire-rated doors

Whether the setup lets the door positively latch, as required under AS1905.1/BCA.

3

Free egress

Whether people can leave without a credential when power fails. This matters on general exit paths.

4

Planning effort

How much door-by-door assessment is needed before installation. More mixed doors means more planning.

Side-by-Side Comparison

OptionBest forBehaviour when power is cutFit for fire-rated doorsFree egressPlanning effort
1. Fail-secureBusinesses protecting fire-rated doors, server rooms or secure storageStays lockedYesNeeds a separate exit methodMedium
2. Fail-safeOffices and warehouses with doors that people must always be able to leave freelyReleasesNoYesLow
3. Mixed configurationBusinesses with several door types, such as a front entry, a server room and a back exitDepends on each doorYes, on the doors that need itYes, on the doors that need itHigh

Which Option Fits Your Situation?

Match the door you are securing to the failure behaviour it needs.

If you are…Look forBest fit
You have a fire-rated door that must positively latchHardware that stays locked and latches without powerFail-secure
You are securing a server room or secure storageA lock that holds through a power cutFail-secure
You have a general exit path that must allow free egressA lock that releases when power is cutFail-safe
Your premises have a front entry, a server room and a back exitA door-by-door specification after a site assessmentMixed configuration

Fail-Safe vs Fail-Secure: Common Questions

Straight answers before you speak to a locksmith.

What happens to my access control lock in a power cut?

It depends on the configuration. A fail-safe lock releases when power is cut, while a fail-secure lock stays locked.

Which setting do fire-rated doors need?

Fire-rated doors must positively latch under AS1905.1/BCA, so they need fail-secure hardware. Confirm the requirements for your building with a licensed locksmith before installation.

Can I use one setting for every door?

Rarely. General exit paths suit fail-safe, while fire-rated doors, server rooms and secure storage suit fail-secure. Each door should be assessed on its own.

Does a keypad or card reader decide fail-safe or fail-secure?

No. The reader controls who gets in. The locking mechanism and its configuration decide what happens when power is lost.

Want Your Doors Specified Correctly?

Call Ultimate Lock on 0481 365 802, available 24/7, to talk through the right setting for each door.

Scroll to Top